Home logo

Specs for 149 winches

picture

Smittybilt Gen2 XRC 17500 Winch 97417

Rated capacity17,500 lbs @ 3.2 ft/min
Max GVWR11,667 lbs.
Power typeElectric 12V
Model No.97417
Weight141 lbs.
Line7/16" x 94' Steel
Wireless remoteNo
Bluetooth receiverNo
WaterproofIP67 (Good)
Maximum pulling power17500 lbs
Weakest pull
(line fully spooled)
10822 lbs
For vehicle GVWR8750 - 11667 lbs
Winch line breaking strength
(synthetic is 5% stronger)
20400 lbs
(Steel)
Pulling strength per layer of cable
Layers of linePulling power
117500 lbsStrongest
214583 lbs
312411 lbs
410822 lbsWeakest

A winch pulls harder with fewer layers of cable on the drum.

waterproof ratingIP67
fairleadSteel roller
finishUV resistant textured matte black
bracingaluminum tie bar
made/assembledMade in China

Extras:

  • 3 solenoid pack mounting positions
  • Magnetic remote sticks on any steel surface

When you purchase this, it comes with:

  • Winch
  • Winch hook
  • Mounting hardware
  • Battery cables
  • Steel roller fairlead
  • Wired remote
fastest line speed22.6 ft/min pulling 0 lbs
slowest line speed3.2 ft/min pulling 17500 lbs
Line speed at a given weight
WeightLine speed
0 lbs22.6 ft/minNo-load, fastest
3000 lbs10.8 ft/min
6000 lbs7.9 ft/min
9000 lbs6.2 ft/min
12000 lbs5.5 ft/min
15500 lbs3.9 ft/min
17500 lbs3.2 ft/minFull-load, slowest

Winches are slower with more load.

Wired remote?Yes
Wired remote lead length12'
Handlebar/Dash switch?No
Wireless remote?No
Can add a wireless remote?Yes
Bluetooth receiver?No
control pack typeSolenoid
power typeElectric
motor voltage12V
gear ratio330:1
clutchsliding ring gear
brakeautomatic in-drum
highest amp draw435A @ 17500 lbs
Amp draw pulling a given weight
WeightAmps
0 lbs75ALeast amps, no-load
3000 lbs140A
6000 lbs210A
9000 lbs270A
12000 lbs330A
15500 lbs390A
17500 lbs435AMost amps, full-load

More load requires more electricity.

Coming soon!

Width24.4"
depth8.4"
height10.7"
weight141 lb
fairlead mount distance10"
mounting pattern6.5" x 10"

Winches with synthetic line weigh significantly less than those with steel line.

Some winches can have their motor or gearbox rotated (clocked) to fit tight spaces.

mounting hardware8 - M10x32mm w/square nuts
mounting hardware torque60 Nm
foot orientationFoot down or foot forward
motor clockableYes
gearbox clockableYes
length x depth x height24.4" x 8.4" x 10.7"
mounting pattern6.5" x 10"
fairlead mount distance10"
warranty ratingBetter
electrical warranty3 years
mechanical warrantyLifetime